right you are
Type: Posts; User: wingnutLP
right you are
it has to be set up with a heavy set minimum 15 degree to just squeeze in legal. If you leave it straight it is illegal unless you gut the handle down a little.
this is a thread about the BSC event please don't drag it off topic.
shoe goo is good or any other plastic glue will do.
I have been informed National Championship individual and team 7 8 th december 2013 EIS Sheffield.
We are migrating the forum to a dedicated forum host who will be taking hourly backups to make sure we get no more service interruptions. The forum will be closed for a few hours today and then will...
What if they were different as in this case where the mask showed valid and the others showed off target?
RK pulled back from 14 11 to 14 all but unfortunately went out to MERTINE
got it not obvious though
takes you here http://www.youtube.com/watch?v=jt-bIyteFTo which has a clock
the real live stream is misnamed and here
where are you watching this?
The price is not likely to come down.
Try making a very low volume product, to a high standard, in a large range of sizes with laser cut components for a low price. It ain't easy.
The glove has an integrated lame cuff.
We agree that selling them without SEMI approval is not ideal but we are seeing too many injury to hold off.
At the US national championships there were...
It is in Hendon behind our existing unit.
Transport document here:
Public transport wise you are 7...
We wanted to get events in the calendar asap.
The "league" events are for fencers with less than a certain amount of national ranking points; that figure is yet to be decided. Basically they are...
When we were worried about whether or not we could get enough feet through the door to recover the capital expenditure in even 10 years Ben said exactly that.
It wasn't really a business plan that...
You can have a camp bed in the armoury area gav :)
If you can get hold of a powerful magnet like the ones sold in our tins then sticking that near the tip of the screwdriver as you unscrew will often get them out.
Watch this space.
Just reverse the process.
Unscrew the pommel, straighten the tipy end of the tang, remove locking nut and handle.
You wouldn't want to do that frequently as eventually the tang will snap off...
You bend the tang near the shoulder leaving most of the tang dead straight then put the handle on. Then put the locking nut on, clamp the protruding remaining end of the tang and bend it and then...
Brand new product out today which has been some time in the making. A few years ago we realised that people were going to extraordinary lengths to put together pommelling handle setups. Lots of...
You might get a witness mark in a cheap nut but I can't find a spring washer that is hard enough to put a mark in an LP nut.
Unlikely, it depends on a lot of factors... contact sales who will be happy to help.